Electric Slab Sawing
This application is used in clean air environments, such as: hospitals, grocery stores, office buildings, malls, strip centers, or any interior place that can not allow exhaust fumes. Clean up is a major concern when doing interior work. We have 15 and 35 gallon vacuums. Most interior jobs do not offer a place on site to dump slurry, such as: Lockheed, malls, Hartsfield, hospitals, office buildings, almost all working finished locations. In these cases, we bring 55 gallon plastic drums with lids, load our slurry in these containers and haul them off site.
Up to 24" cutting depth, Hydraulic. This method is used for openings or cuts that require no overcutting, such as: window or door openings, etc. This can also be useful where access to other equipment is not possible.
Concrete removal is necessary for a lot of the work we perform. We can have 20 yd cans delivered to site or bring our u-dump trailer, depending on the size of job. Our u-dump is useful for most of our small cut and remove jobs. Being able to remove and haul off the concrete or asphalt we cut makes us very versatile to our customer base.
This specialty tool is useful when customers have some uneven areas in their slab, or wants to level off some high spots in their floor, such as: high spots in warehouse where fork lifts load and unload material, and for safety reasons need floor area smooth. Grinding can also be used for cosmetic looks on concrete floors by peeling away the surface and exposing the aggregate.
Re-crowning Core bits
We have provided this service since 1987. We are capable of re-crowning any diameter core bit, and can cut off tubes to shorten length of bit. This allows the customer to get the most life out of their core bit. For core bits that are too damaged for re-crowning, we sell new core bits as well.
Sometimes we can not avoid going into a confined space to work, such as: customer can not dig out man hole for us to core because of utilities or pipe being in the way, installing or removing manhole steps, large concrete tanks needing holes or handsaw work done and only have access from one entrance, etc. When working in confined spaces, Metro Koring personnel are always in compliance with OSHA regulations and standards. We routinely provide a confined space permit, an extra person, a gas detector, blower, tripod and harness, and other safety equipment necessary for the particular job.
Kor-N-Seal Rubber Boots
We sell and install any size boot for sanitary sewer, such as: HDPE, PVC, and DIP. We have worked closely with precast companies from the beginning, and understand what size hole to core with what ever size pipe you are installing. This is just one more advantage that we have over our competitors.
Manhole Step Installation / Removal
In manholes, when steps are installed improperly, or not installed at all, we can install new steps correctly and permanently in these confined spaces. In these situations we bring a crew of 2 men with all of our confined space equipment, and provide new steps if needed.